Menü öffnen
Suchen
Region (us)
Products
Company
Contact
de  en  pl  fr  hr  nl  hu  it  sv  sl  cn  es

Sealing of main supply lines at Augsburg University Hospital

CABLE ENTRY WITH STAINLESS STEEL FLANGE HRD2X150-1X80

Sealing of main supply lines at Augsburg University Hospital
Augsburg
CABLE ENTRY WITH STAINLESS STEEL FLANGE HRD2X150-1X80
EALING OF MAIN SUPPLY LINES AT AUGSBURG UNIVERSITY HOSPITAL 

Project Description

The project involved the Anbau West annexe, an intensive care centre with institutes for microbiology and laboratory medicine, hemostasiology, transfusion medicine and pathology. The six-storey building contains a total floor area of approx. 30,000 square metres, with an effective area of 12,900 square metres. The planned investment amounts to approx. 110 million euros. The State of Bavaria will cover 90% of this cost with the remaining 10% from former management, the city and the district of Augsburg. Work began at the end of 2013 and is set to finish in October 2020 

Cable entry into the media channel

The existing main supply lines could not be rerouted during construction of an accessible service duct. A recess around the cables was left open during the construction work. Image: Cable entry into the service duct.

Cable exit from the media duct 

Special feature: Cables enter in and out of the service duct at varying angles. The position of the cables can not be altered. Image: Cable outlet on the service duct.

 Close-up: Cable entry into the service duct 

Close-up: Cable outlet on the service duct 

Cable entry into the media channel

Solution: Overmeasure of a protrusion flange in split-design with different pipe socket outlets in relation to the exit angle of the cable. Image: Cable entry into the service duct.

Image: Cable outlet on the service duct 

HAUFF-TECHNIK SOLUTIONS
Specifications 
Correct sealing of the cable to the building. Dislocation of the cable not possible Subsequent installation required 
Requirements 
Gas-proof and watertight sealing of the cable 
Products Used 
Stainless steel flange HRD2x150-1x80-FG/80-S55°-S47.5°-S45° Stainless steel flange HRD2x150-1x80-FG/80-S60°-S45°