Building entries Single building entriesThrough the wall - wall already exists (trenchless construction)

Membrane injection system

for buildings with a basement

MIS100ND VT63

Add to wish list

Membrane injection system - for buildings with a basement

No groundwork at the property
Universal building entry with membrane injection system for drill holes in the most common types of wall
Controlled ejection of resin through slit membrane hose

For the reliable sealing of drinking water, power or telecommunications services. A drilling rocket is used to excavate a continuous empty conduit route from the basement of the building to the edge of the property.

Facts

Advantages:

Can be fully installed from the inside of building
Ideal for applications in which the building connection route has been built over or is difficult to access

Scope of delivery:

1 piece Octagonal inner sealing element
1 piece MIS 100/VT63 flange unit with sleeve pipe and connection sleeve
2 pieces self-tapping screws M8x45 and washers for sealing service lines
Outer sealing element with injection hose
2 pieces twist protection flaps

Dimensions:

For core drills: ID 99 - 103 mm
For wall thicknesses: from 240 to 600 mm

Application range:

DIN 18533 W1-E
Waterproof concrete stress class 1, waterproof concrete stress class 2

Material:

Front plate: glass fibre reinforced polyamide
Sealing rubber, flange, seal insert and counter-bearing: EPDM
Pipe: PVC-U
Screws and washers: stainless steel V2A (AISI 304L)

Tightness:

gastight and watertight to 1.0 bar

Downloads

Installation instructions

MIS100ND VT63 (PDF, 2MB)

Data sheet & tender specification

For download of data sheet and tender specification please configurate the product in the section below and download via the symbol Download symbol

Variants

wall thickness (mm)	Article code	Article number	GTIN
240 - 600	MIS100ND VT63	2900300800	4052487174299	Your download for the choosen variant: Data sheet Download (.pdf) Tender specifications Text view (.txt) Word (.docx) Quantity: